Have a Question? Talk to a Specialist! Call 800.739.7706Contact Us Now!

How Do Gas Detector Tubes Work? A Guide to Air-Sampling Equipment and Its Uses


how-gas-detectors-work



Everyone recognizes the importance of air. All living things need it, and for thousands of years, at least since the time of Greek philosopher Aristotle, air has been recognized as one of the four basic elements of nature along with fire, water and earth.

The importance of air is obvious and easy to understand, but the task of its stewardship is complicated and complex. Entire industries, government agencies, educational institutions and other organizations dedicate full-time effort to research, regulate, analyze and encourage sound air practices. We must have air everywhere we go, including in:

·         Cars

·         Homes

·         Buildings

·         Airplanes

·         Malls and other complexes

·         Public transportation

·         Mining sites

·         Construction sites

·         Hotels

·         Restaurants

·         Arenas and event centers

·         Garages

·         Tunnels

·         Outdoors


Within each air-oriented application might be many sections and subsections of matters to manage, but the right tools can help you do it. For example, a variety of gas detector tubes are available to provide accurate measurements of gases and vapors in the air.

It’s vitally important to general human safety to have plenty of oxygen present and noxious, harmful, explosive substances absent.

There may not be a universally simple answer to the question: How does gas detection work? It is basically testing the air to see what it contains, especially what might be dangerous or anything we cannot see or smell. In gas detection, a sensor measures the particulate matter (usually expressed as parts per million-ppm) in air and gives a report on what it contains.

This information helps you and people from all walks to know more about the air-quality issues affecting life and work, and air-sampling equipment helps you monitor the environmental quality of your indoor and outdoor spaces.

What Are Gas Detector Tubes and Why Are They Needed?

A gas detector tube is a tool that senses how much oxygen is in the air and/or can measure and monitor for several types of gases or vapors in the air. They’re especially helpful in spaces that are confined or have poor ventilation but are used in places big, small, enclosed, open, indoor and outdoor.

Gas detection systems are already at work in many places where people work, play or otherwise exist. More people and businesses invest in them now than ever before because pollution can literally be anywhere and because gas detection provides relative safety from it.

The Environmental Protection Agency recognizes six common air pollutants that can harm our health:

1.     Carbon monoxide: A colorless, odorless gas emitted from any kind of combustion process, the presence of which reduces oxygen in the air.

2.     Lead: A naturally occurring metal that, at high concentrations, can be dangerous.

3.     Nitrogen oxides: A group of highly reactive gases produced from the emissions of regular vehicles and buses, power plants and off-road equipment.

4.     Ozone: Any number of chemical reactions resulting from a mix of chemicals in the emissions of industrial and utility complexes, as well as vehicle exhaust, gas vapors, solvents and volatile-organic compounds.

5.     Particulate matter: This may include acids such as nitrates and sulfates, organic chemicals, metals and soil or dust particles.

6.     Sulfur oxides: Another group of highly reactive gases produced for the most part at combustion-powered industrial plants and to a lesser extent by trains, ships and off-road equipment.

 

Other Harmful Gases and Vapors

More gases and vapors don’t make the EPA’s top-six list but can be a threat to indoor and outdoor air quality close to homes and businesses, including:

·         Acetone

·         Acetylene

·         Amines

·         Ammonia

·         Asbestos

·         Benzene

·         Butane

·         Carbon dioxide

·         Central heat-and-air systems

·         Chlorine

·         Diesel and jet fuel

·         Ethanol

·         Formaldehyde and some pressed-wood products

·         Gasoline

·         Hydrocarbons

·         Several types of hydrogens

·         Lead

·         Methane

·         Mold and mildew

·         Natural gas used to power appliances

·         Ozone

·         Pesticide

·         Phenol

·         Phosphine

·         Propane

·         Radon gas

·         Sulfur dioxide

·         Toluene

·         Wood or other fuel-burning appliances such as stoves and fireplaces

·         Vapor from contaminated soil

·         Volatile-organic compounds found in new carpet, upholstery or flooring

·         Xylene


Concentrations of these materials harm or affect our respiratory systems, brains and organs. In severe cases they can cause death. A long list of concerns makes it more and more common for people to take it upon themselves to see what’s in their environment.

Most gas detectors contain an electrochemical sensor that captures and analyzes the particulates in the air. A variety of detectors can measure the oxygen levels in air plus alert you to the presence of something harmful. In addition to detectors and monitoring, you can help prevent air-quality concerns by keeping appliances clean, inspecting utilities regularly, and maintaining the ventilation system well.

How to Use Gas Detector Tubes

Handheld detectors are fairly simple to use, though instructions will vary by model. It’s always a good idea to read and keep the users’ manual, as it will help you get to know your tool the best. Most tube-style detectors are a handheld device you turn on and carry through or around the area where you want to test the air. Then you’ll refer to the tube where the color will change and/or the gas level will show.

It’s important to give the sensors enough time to activate and then to walk slowly enough in the area that they have the time to work in each area you want to monitor. Except for some gas detector models that are ready in seconds, plan to allow about 40 seconds for the sensors to do their job and respond before moving to the next area.

 time-for-sensors

If you have a concern about a certain kind of gas, it might help you to learn a bit about its characteristics and properties so you can be more thorough and certain in your testing. It is a good practice to test high, low and in the middle since some gases go up and some fall. For example, hydrogen, methane, ammonia and acetylene tend to rise since they weigh less than air, and chlorine and propane sink low since they weigh more than air.

The actual gas detector device contains a thin, sealed glass tube with a chemical agent inside that reacts with the gas or vapor you’re seeking to measure in the air. The chemical agent inside the tube changes color when the detector senses the gas or vapor, then you change the tube within the detector between tests.

Small calibration scales within the detectors give you an accurate reading of gas levels in the air. They can sense one specific type or several at once. The method of testing by gas detector tube allows most people to conduct their own tests in a simple, easy and inexpensive way.

Common Gas Tube Concerns

Most consumer-level models are handheld and weigh less than a pound. They are available in a selection of mobile dand fixed devices, as well as ones that detect a single gas or multiple gases. So where do you get a gas detector and how do you pick the right one? You may have or know people who have fixed detectors in the home for smoke, carbon monoxide and sometimes radon. Most people have heard of these kinds or seen them in the home-improvement store.

The more refined and broadly capable detectors are available through specialized vendors such as Environmental Equipment and Supply. We carry a wide selection of different gas detectors and other equipment to analyze water, soil and air.

Gas Detection Devices Offer Many Options

RKI multi-gas detector instruments include several models people consider to be a personal gas monitor.

The GX 2009 measures four gases: oxygen, carbon dioxide, hydrogen sulfate and the low-explosive limit (LEL) of gases. It fits in the palm of your hand and weighs about five ounces. It is ideal for confined spaces and encased with a tough, rubber exterior for lasting durability. For example, these little samplers are waterproof and resistant to dust and impact. They emit an audible alarm.

The handheld GX 2012 measures five gases: oxygen, carbon dioxide, hydrogen sulfate, percentage of methane and LEL. It has two operating modes and is good for confined spaces. This model has a built-in sample pump, which is how you draw air into the device. The internal microprocessor continually self-checks sensor operation, battery power, flow rate, circuit and calibration. You can power this model with either alkaline or lithium-ion rechargeable batteries, and it gives you audible and visible alerts.

RKI Gas Tracer is the tool of choice for gas-line professionals and enables users to monitor oxygen, carbon dioxide, percentage of methane, LEL and ppm. This is the right tool for detecting small gas leaks with its leak-tracker mode that alerts you with an increasingly loud audible alarm if gas becomes present.

The versatile Eagle can detect up to six different gases at once and offers 400 gas-monitoring configurations to set it for a wide range of toxic gases, ppm and LEL. It is also handheld but has an internal pump and handheld wand powerful enough to draw an air sample from 125 feet away. 

wristwatch-gas-detection

RKI single-gas detector instruments come in several pocket-sized, handheld options, including a wristwatch that tells time in addition to monitoring single gases.

The 03-series model senses oxygen deficiency, hydrogen sulfide, hydrocarbons or carbon monoxide and weighs less than three ounces. The SC-01 monitor contains smart sensor technology that re-calibrates itself anytime the sensors are changed. The single-gas detector instruments can help you keep an eye on the substance that concerns you or is relevant to your situation.

RKI Fixed Gas Detection

RKI fixed gas detection systems can be one stand-alone detector or a series of integrated controllers and receivers that work as an integrated team. These meters are small enough to be unobtrusive but large enough to display the levels of whatever gas you’re measuring, such as methane, oxygen, hydrocarbons, carbon monoxide, hydrogen sulfide and many others. Some of the meters have alarms that are visual, audible or some combination of both.

Fixed detector systems serve many big industries, such as:

·         Electric, gas and water utilities

·         Manufacturing

·         Refineries

·         Automotive

·         Petrochemical

·         Parking garages

·         Research and development

·         Paper mills

·         Steel production

The fixed gas detector models may be found most frequently in large- and medium-sized businesses, but they can be used in any environment you want to be safer. You can affix them right at the gas source as well as within structures to monitor gas levels.

More Gas Detector Tubes and Pumps

RAE gas detector tubes contain the chemicals that react with the gases or vapors in the air you want to measure. They are the refill you need for many of the gas detectors and feature vivid, easy-to-read color for clear results. They do not require calibration and can measure dozens of combinations of gases or vapors with different choices for the level of ppm you need or would like. 

RAE-LP-1200-piston-pump

 
You can test for about 30 different gases with the RAE systems LP-1200 Piston Pump and the gas detector tube for whatever gas or vapor you seek to measure. The pump is simple to operate, like a small bicycle-tire pump with a plunger that draws air into the tube. Some of the handheld detectors contain a pump device, but many of the measurements can be taken with just the pump and corresponding tubes.

You’ll encounter more choices as you look at different models using gas detector tubes. Most have a rubber tip, tube and tip breaker to snap off the end of the tube. Some come pre-calibrated while others require periodic calibration. Some models you can set for how much air you want to draw, which usually corresponds to the ppm you want to measure.

Since there are some 500 different gases you might want to monitor, it’s also helpful to familiarize yourself with the chemical formula term for the gas you want to measure. Other gas detector tube and air-sampling tips:

  • Change or charge the device battery regularly
  • Calibrate it according to manufacturer specifications
  • Perform advised maintenance
  • Keep the instruction manual
gas-formula-terms

Pick a Trusted Partner

Environment Equipment & Supply has all the different detectors, parts and accessories discussed here plus anything needed to monitor and protect your indoor and outdoor air quality, whether it is in a residential, small commercial or large-industrial setting.

You’ll have a knowledgeable partner in Envisupply. We’ve been in business 26 years helping clients get the right tools and equipment to monitor, test and generally work with all aspects of air, water and soil on any scale. We sell and rent new and used equipment plus offer repair and maintenance services.

Our product line includes many kinds of equipment, such as gas detector tubes, water pumps and bailers, air monitors, ground probes, tubing, work gloves, safety glasses and much more. We offer expertise in matching the right tool to the project or task, as well as in best usage, maintenance and service practices.

The technical experts, field staff and other employees at Envisupply are known not only for their product and environmental expertise but also for excellent service. We use our experience to help clients resolve problems, address concerns and protect people.

Our company, products and services make it easier to measure, monitor and gauge our environments, always with safety as the objective. Whether you worry about toxic gas lurking in the air system or detecting flammable gases to keep your workers or family safe, we can help you purchase or rent the right equipment. 

How Do Gas Detector Tubes Work? A Guide to Air-Sampling Equipment and Its Uses

Everyone recognizes the importance of air. All living things need it, and for thousands of years, at least since the time of Greek philosopher Aristotle, air has been recognized as one of the four basic elements of nature along with fire, water and earth.

The importance of air is obvious and easy to understand, but the task of its stewardship is complicated and complex. Entire industries, government agencies, educational institutions and other organizations dedicate full-time effort to research, regulate, analyze and encourage sound air practices. We must have air everywhere we go, including in:

·        Cars

·        Homes

·        Buildings

·        Airplanes

·        Malls and other complexes

·        Public transportation

·        Mining sites

·        Construction sites

·        Hotels

·        Restaurants

·        Arenas and event centers

·        Garages

·        Tunnels

·        Outdoors

Within each air-oriented application might be many sections and subsections of matters to manage, but the right tools can help you do it. For example, a variety of gas detector tubesareavailable to provide accurate measurements of gases and vapors in the air.

It’s vitally important to general human safety to have plenty of oxygen present and noxious, harmful, explosive substances absent.

There may not be a universally simple answer to the question: How does gas detection work? It is basically testing the air to see what it contains, especially what might be dangerous or anything we cannot see or smell. In gas detection, a sensor measures the particulate matter (usually expressed as parts per million-ppm) inairand gives a report on what it contains.

This information helps you and people from all walks to know more about the air-quality issues affecting life and work, and air-sampling equipment helps you monitor the environmental quality of your indoor and outdoor spaces. 


how-gas-detectors-work



Everyone recognizes the importance of air. All living things need it, and for thousands of years, at least since the time of Greek philosopher Aristotle, air has been recognized as one of the four basic elements of nature along with fire, water and earth.

The importance of air is obvious and easy to understand, but the task of its stewardship is complicated and complex. Entire industries, government agencies, educational institutions and other organizations dedicate full-time effort to research, regulate, analyze and encourage sound air practices. We must have air everywhere we go, including in:

·         Cars

·         Homes

·         Buildings

·         Airplanes

·         Malls and other complexes

·         Public transportation

·         Mining sites

·         Construction sites

·         Hotels

·         Restaurants

·         Arenas and event centers

·         Garages

·         Tunnels

·         Outdoors


Within each air-oriented application might be many sections and subsections of matters to manage, but the right tools can help you do it. For example, a variety of gas detector tubes are available to provide accurate measurements of gases and vapors in the air.

It’s vitally important to general human safety to have plenty of oxygen present and noxious, harmful, explosive substances absent.

There may not be a universally simple answer to the question: How does gas detection work? It is basically testing the air to see what it contains, especially what might be dangerous or anything we cannot see or smell. In gas detection, a sensor measures the particulate matter (usually expressed as parts per million-ppm) in air and gives a report on what it contains.

This information helps you and people from all walks to know more about the air-quality issues affecting life and work, and air-sampling equipment helps you monitor the environmental quality of your indoor and outdoor spaces.

What Are Gas Detector Tubes and Why Are They Needed?

A gas detector tube is a tool that senses how much oxygen is in the air and/or can measure and monitor for several types of gases or vapors in the air. They’re especially helpful in spaces that are confined or have poor ventilation but are used in places big, small, enclosed, open, indoor and outdoor.

Gas detection systems are already at work in many places where people work, play or otherwise exist. More people and businesses invest in them now than ever before because pollution can literally be anywhere and because gas detection provides relative safety from it.

The Environmental Protection Agency recognizes six common air pollutants that can harm our health:

1.     Carbon monoxide: A colorless, odorless gas emitted from any kind of combustion process, the presence of which reduces oxygen in the air.

2.     Lead: A naturally occurring metal that, at high concentrations, can be dangerous.

3.     Nitrogen oxides: A group of highly reactive gases produced from the emissions of regular vehicles and buses, power plants and off-road equipment.

4.     Ozone: Any number of chemical reactions resulting from a mix of chemicals in the emissions of industrial and utility complexes, as well as vehicle exhaust, gas vapors, solvents and volatile-organic compounds.

5.     Particulate matter: This may include acids such as nitrates and sulfates, organic chemicals, metals and soil or dust particles.

6.     Sulfur oxides: Another group of highly reactive gases produced for the most part at combustion-powered industrial plants and to a lesser extent by trains, ships and off-road equipment.

 

Other Harmful Gases and Vapors

More gases and vapors don’t make the EPA’s top-six list but can be a threat to indoor and outdoor air quality close to homes and businesses, including:

·         Acetone

·         Acetylene

·         Amines

·         Ammonia

·         Asbestos

·         Benzene

·         Butane

·         Carbon dioxide

·         Central heat-and-air systems

·         Chlorine

·         Diesel and jet fuel

·         Ethanol

·         Formaldehyde and some pressed-wood products

·         Gasoline

·         Hydrocarbons

·         Several types of hydrogens

·         Lead

·         Methane

·         Mold and mildew

·         Natural gas used to power appliances

·         Ozone

·         Pesticide

·         Phenol

·         Phosphine

·         Propane

·         Radon gas

·         Sulfur dioxide

·         Toluene

·         Wood or other fuel-burning appliances such as stoves and fireplaces

·         Vapor from contaminated soil

·         Volatile-organic compounds found in new carpet, upholstery or flooring

·         Xylene


Concentrations of these materials harm or affect our respiratory systems, brains and organs. In severe cases they can cause death. A long list of concerns makes it more and more common for people to take it upon themselves to see what’s in their environment.

Most gas detectors contain an electrochemical sensor that captures and analyzes the particulates in the air. A variety of detectors can measure the oxygen levels in air plus alert you to the presence of something harmful. In addition to detectors and monitoring, you can help prevent air-quality concerns by keeping appliances clean, inspecting utilities regularly, and maintaining the ventilation system well.

How to Use Gas Detector Tubes

Handheld detectors are fairly simple to use, though instructions will vary by model. It’s always a good idea to read and keep the users’ manual, as it will help you get to know your tool the best. Most tube-style detectors are a handheld device you turn on and carry through or around the area where you want to test the air. Then you’ll refer to the tube where the color will change and/or the gas level will show.

It’s important to give the sensors enough time to activate and then to walk slowly enough in the area that they have the time to work in each area you want to monitor. Except for some gas detector models that are ready in seconds, plan to allow about 40 seconds for the sensors to do their job and respond before moving to the next area.

 time-for-sensors

If you have a concern about a certain kind of gas, it might help you to learn a bit about its characteristics and properties so you can be more thorough and certain in your testing. It is a good practice to test high, low and in the middle since some gases go up and some fall. For example, hydrogen, methane, ammonia and acetylene tend to rise since they weigh less than air, and chlorine and propane sink low since they weigh more than air.

The actual gas detector device contains a thin, sealed glass tube with a chemical agent inside that reacts with the gas or vapor you’re seeking to measure in the air. The chemical agent inside the tube changes color when the detector senses the gas or vapor, then you change the tube within the detector between tests.

Small calibration scales within the detectors give you an accurate reading of gas levels in the air. They can sense one specific type or several at once. The method of testing by gas detector tube allows most people to conduct their own tests in a simple, easy and inexpensive way.

Common Gas Tube Concerns

Most consumer-level models are handheld and weigh less than a pound. They are available in a selection of mobile dand fixed devices, as well as ones that detect a single gas or multiple gases. So where do you get a gas detector and how do you pick the right one? You may have or know people who have fixed detectors in the home for smoke, carbon monoxide and sometimes radon. Most people have heard of these kinds or seen them in the home-improvement store.

The more refined and broadly capable detectors are available through specialized vendors such as Environmental Equipment and Supply. We carry a wide selection of different gas detectors and other equipment to analyze water, soil and air.

Gas Detection Devices Offer Many Options

RKI multi-gas detector instruments include several models people consider to be a personal gas monitor.

The GX 2009 measures four gases: oxygen, carbon dioxide, hydrogen sulfate and the low-explosive limit (LEL) of gases. It fits in the palm of your hand and weighs about five ounces. It is ideal for confined spaces and encased with a tough, rubber exterior for lasting durability. For example, these little samplers are waterproof and resistant to dust and impact. They emit an audible alarm.

The handheld GX 2012 measures five gases: oxygen, carbon dioxide, hydrogen sulfate, percentage of methane and LEL. It has two operating modes and is good for confined spaces. This model has a built-in sample pump, which is how you draw air into the device. The internal microprocessor continually self-checks sensor operation, battery power, flow rate, circuit and calibration. You can power this model with either alkaline or lithium-ion rechargeable batteries, and it gives you audible and visible alerts.

RKI Gas Tracer is the tool of choice for gas-line professionals and enables users to monitor oxygen, carbon dioxide, percentage of methane, LEL and ppm. This is the right tool for detecting small gas leaks with its leak-tracker mode that alerts you with an increasingly loud audible alarm if gas becomes present.

The versatile Eagle can detect up to six different gases at once and offers 400 gas-monitoring configurations to set it for a wide range of toxic gases, ppm and LEL. It is also handheld but has an internal pump and handheld wand powerful enough to draw an air sample from 125 feet away. 

wristwatch-gas-detection

RKI single-gas detector instruments come in several pocket-sized, handheld options, including a wristwatch that tells time in addition to monitoring single gases.

The 03-series model senses oxygen deficiency, hydrogen sulfide, hydrocarbons or carbon monoxide and weighs less than three ounces. The SC-01 monitor contains smart sensor technology that re-calibrates itself anytime the sensors are changed. The single-gas detector instruments can help you keep an eye on the substance that concerns you or is relevant to your situation.

RKI Fixed Gas Detection

RKI fixed gas detection systems can be one stand-alone detector or a series of integrated controllers and receivers that work as an integrated team. These meters are small enough to be unobtrusive but large enough to display the levels of whatever gas you’re measuring, such as methane, oxygen, hydrocarbons, carbon monoxide, hydrogen sulfide and many others. Some of the meters have alarms that are visual, audible or some combination of both.

Fixed detector systems serve many big industries, such as:

·         Electric, gas and water utilities

·         Manufacturing

·         Refineries

·         Automotive

·         Petrochemical

·         Parking garages

·         Research and development

·         Paper mills

·         Steel production

The fixed gas detector models may be found most frequently in large- and medium-sized businesses, but they can be used in any environment you want to be safer. You can affix them right at the gas source as well as within structures to monitor gas levels.

More Gas Detector Tubes and Pumps

RAE gas detector tubes contain the chemicals that react with the gases or vapors in the air you want to measure. They are the refill you need for many of the gas detectors and feature vivid, easy-to-read color for clear results. They do not require calibration and can measure dozens of combinations of gases or vapors with different choices for the level of ppm you need or would like. 

RAE-LP-1200-piston-pump

 
You can test for about 30 different gases with the RAE systems LP-1200 Piston Pump and the gas detector tube for whatever gas or vapor you seek to measure. The pump is simple to operate, like a small bicycle-tire pump with a plunger that draws air into the tube. Some of the handheld detectors contain a pump device, but many of the measurements can be taken with just the pump and corresponding tubes.

You’ll encounter more choices as you look at different models using gas detector tubes. Most have a rubber tip, tube and tip breaker to snap off the end of the tube. Some come pre-calibrated while others require periodic calibration. Some models you can set for how much air you want to draw, which usually corresponds to the ppm you want to measure.

Since there are some 500 different gases you might want to monitor, it’s also helpful to familiarize yourself with the chemical formula term for the gas you want to measure. Other gas detector tube and air-sampling tips:

  • Change or charge the device battery regularly
  • Calibrate it according to manufacturer specifications
  • Perform advised maintenance
  • Keep the instruction manual
gas-formula-terms

Pick a Trusted Partner

Environment Equipment & Supply has all the different detectors, parts and accessories discussed here plus anything needed to monitor and protect your indoor and outdoor air quality, whether it is in a residential, small commercial or large-industrial setting.

You’ll have a knowledgeable partner in Envisupply. We’ve been in business 26 years helping clients get the right tools and equipment to monitor, test and generally work with all aspects of air, water and soil on any scale. We sell and rent new and used equipment plus offer repair and maintenance services.

Our product line includes many kinds of equipment, such as gas detector tubes, water pumps and bailers, air monitors, ground probes, tubing, work gloves, safety glasses and much more. We offer expertise in matching the right tool to the project or task, as well as in best usage, maintenance and service practices.

The technical experts, field staff and other employees at Envisupply are known not only for their product and environmental expertise but also for excellent service. We use our experience to help clients resolve problems, address concerns and protect people.

Our company, products and services make it easier to measure, monitor and gauge our environments, always with safety as the objective. Whether you worry about toxic gas lurking in the air system or detecting flammable gases to keep your workers or family safe, we can help you purchase or rent the right equipment. 

How Do Gas Detector Tubes Work? A Guide to Air-Sampling Equipment and Its Uses

Everyone recognizes the importance of air. All living things need it, and for thousands of years, at least since the time of Greek philosopher Aristotle, air has been recognized as one of the four basic elements of nature along with fire, water and earth.

The importance of air is obvious and easy to understand, but the task of its stewardship is complicated and complex. Entire industries, government agencies, educational institutions and other organizations dedicate full-time effort to research, regulate, analyze and encourage sound air practices. We must have air everywhere we go, including in:

·        Cars

·        Homes

·        Buildings

·        Airplanes

·        Malls and other complexes

·        Public transportation

·        Mining sites

·        Construction sites

·        Hotels

·        Restaurants

·        Arenas and event centers

·        Garages

·        Tunnels

·        Outdoors

Within each air-oriented application might be many sections and subsections of matters to manage, but the right tools can help you do it. For example, a variety of gas detector tubesareavailable to provide accurate measurements of gases and vapors in the air.

It’s vitally important to general human safety to have plenty of oxygen present and noxious, harmful, explosive substances absent.

There may not be a universally simple answer to the question: How does gas detection work? It is basically testing the air to see what it contains, especially what might be dangerous or anything we cannot see or smell. In gas detection, a sensor measures the particulate matter (usually expressed as parts per million-ppm) inairand gives a report on what it contains.

This information helps you and people from all walks to know more about the air-quality issues affecting life and work, and air-sampling equipment helps you monitor the environmental quality of your indoor and outdoor spaces.