Have a Question? Talk to a Specialist! Call 800.739.7706Contact Us Now!

RKI Instruments Eagle Gas Monitor

RKI Instruments Eagle

Downloads

Eagle_Portable_Pricing_2012

Downloads

Eagle Data Sheet
Eagle Data Sheet
(2pg, 150KB)

RKI Instruments Eagle portable gas detector is a 1 to 6 sensor monitor, allowing the user almost limitless sensor combinations (over 400) and providing superb protection.  The Eagle gas monitor is the most versitile gas detection instrument you can buy and it's rugged too!  Housed in an ergonomic chemical and weather resistant enclosure, the RKI Eagle is intrinsically safe and UL classified in most versions.  It can provide up to 30 hours of continuous use.  

The Eagle multigas monitor has unique features like choices for readings for hydrocarbons in ppm or LEL, infared sensors in LEL or % by volume are available at the push of a button.  The Eagle has a methane elimination switch for environmental applications, a large list of toxic gases and measurable ranges.  Each instrument has a strong internal pump and hydrophobic filters increase it's water resistance.  The pump is equipped with a Low Flow shut off alarm and can draw a sample up to 125 feet away.  This allows for quick response and recovery from distant sampling locations.  A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, datalogging, continuous operation adapters, remote alarms and strobes, and dilution fittings, just to name a few.

Easy to operate, rugged design, and with a wide variety of sensor choices makes the Eagle industry's selection for air quality monitoring.

 

Features:

  • Simultaneous detection of up to 6 different gases
  • Over 400 gas monitoring configurations
  • Wide range of toxic gases
  • PPM / LEL hydrocarbon detection
  • Powerful long-life pump up to 125’ range with filters
  • Low flow pump shut off and alarm
  • Methane elimination switch for
    environmental use
  • Security “Adjustment Lockout Switch”
  • Up to 30 hours of continuous operation
  • Alkaline or Ni-Cad capability
  • IR Sensors available for CO2, % LEL CH4 or HC, % volume CH4 or HC
  • Transformer testing version available
  • Datalogging option
  • Autocalibration / single gas calibration
  • Dual hydrophobic filters (most versions)
  • Ergonomic RFI / EMI / chemical / weather resistant enclosure
  • Intrinsically safe design, CSA (C / US) & UL classified (most versions)
  • Complies with EPA Method 21