Have a Question? Talk to a Specialist! Call 1-800-739-7706Contact Us Now!

StructureScan™ Mini HR 3D, Concrete Inspection System

StructureScan™ Mini HR 3D, Concrete Inspection System
Prep FeeDailyWeeklyMonthly
$ 100 $ 125 $ 600 $ 2,400
Radan 7 (Software) w/Laptop $ 50 $ 200 $ 600

Typical Uses:

  • Concrete inspection - locate metallic and non-metallic targets in walls, floors and ceilings
  • Structure inspection - bridges, monuments, towers, tunnels, garages, parking decks and balconies
  • Condition assessment - map relative concrete condition for rehab planning
  • Measure slab thickness
  • Void location

Weighing in at just over three pounds, the StructureScan™ Mini is a lightweight alternative to other GPR systems. This complete system is ideal for locating the position and depth of rebar, conduits, post-tension cables, and voids in concrete. The Mini features an easy-to-use operator interface, ergonomic handle and controls, survey wheel encoder, as well as a guiding laser for locating. The high resolution, LED backlit 5.7" display provides a detailed 3D image of the subsurface structure. The Mini marks the data on screen with a small dot when characteristics of rebar or conduit are identified. For accurate marking of targets embedded in the concrete, the lasers on the side of the unit indicate the exact location of the center of the target. The data can be stored directly to a SD-RAM card for later playback, or transferred to a computer for printing or integration into a report.

With a 2600 MHz antenna, the Mini locates rebar, conduits and post-tension cables in depths of up to 16 inches. For an all-in-one, handheld GPR system for concrete analysis and inspection, rely on the ultra-portable StructureScan™ Mini.



  • Locate ferrous and non-ferrous targets (rebar, stainless steel, plastic conduit)in real-time
  • User-friendly, intuitive navigation
  • Ability to see multiple rebar layers within concrete
  • Automatic dielectric calculation
  • Four wheel drive survey encoder
  • Data is displayed on a high-resolution, 5.7 inch color screen
  • Locate and mark targets quickly with backup cursor feature and innovative laser positioning
  • Lightweight and simple to transport, all-in-one unit weights about three pounds
  • Transfer data with ease, data stored on flash card
  • No periodic calibration necessary
  • Built-in automatic target detection software
  • Left and right hand orientation
  • No site hazards or need to close off work areas as with radiography (X-Ray)
  • Durable components that have been tested to be dust proof and water- resistant