|
BACK
Ludlum Model 9 Ion Chamber Radiation Monitor
The Ludlum Model 9 Radiation Monitor is used for general purpose survey.
Contact Environmental Equipment and supply today for all your radiation detection and monitoring equipment needs.
Features:
- Ion Chamber
- 4 Ranges
- Retractable Beta Shield
- Total Counting Range from 0 - 5000 mR/hr
- Built-In Audio
- Chamber Construction: Carbon coated acrylic
- Chamber Volume: 220 cm³
- Window: 7 mg/cm² aluminized mylar
- Window Area: Active - 40 cm² & Open - 30 cm²
- Beta Shield: Retractable 300 mg/cm² phenolic slide
- Energy Response: Within plus or minus 20% of true value from 10 keV - 2 MeV
- Beta Factor: 5.4 with uranium slab
- Audio: Built in unimorph speaker with ON/OFF switch
- Meter Dial: 0 - 5 mR/hr, BAT TEST
- Multipliers: X1, X10, X100, X1000
- Linearity: Reading within plus or minus 10% of true value
- Calibration Controls: Accessible from front of instrument (protective cover provided)
- Response: Typically 3 seconds from 10% to 90% of final reading
- Reset: Push-button to discharge chamber and zero meter
- Zero Adjust: 3 turn potentiometer
- Warm-up Time: Approximately 5 minutes
- Power: 2 each "D" cell batteries (housed in sealed compartment that is accessible from front of instrument)
- Battery Life: Greater than 200 hours with alkaline batteries (battery condition can be checked on meter)
- Meter: 2.5" (6.4 cm) arc, 1 mA analog type
- Construction: Cast and drawn aluminum with beige polyurethane enamel paint
- Temperature Range: -4° F(-20° C) to 122° F(50° C)
May be certified for operation from -40° F(-40° C) to 150° F(65° C)
- Size: 8"(20.3 cm)H X 3.5"(8.9 cm)W X 8.5"(21.6 cm)L
- Weight: 4 lbs (1.8 kg) including batteries
|