Proactive Environmental Products 12-Volt Tornado Pump
| Part Number | Price |
|---|
| Pump |
51872 |
$ 300.00 |
| Controller |
51730 |
$ 500.00 |
| Performance | |
|---|
| Lift At 12 Volts | (GPM) at 12 Volts |
|---|
| 3 |
3.75 |
| 10 |
3.5 |
| 20 |
3.0 |
| 30 |
2.75 |
| 40 |
2.50 |
| 50 |
2.00 |
| 60 |
1.5 |
| 70 |
1.0 |
| 80 |
0.5 |
| 90 |
.4 |
| 100 |
0.25 |
Test was conducted with a 12 volt battery at 12.5 volts.
Leaving your vehicle running while using this pump will dramatically increase volume
With the Tornado Pump you can pump up to 100 feet in depth without a controller! Environmental Equipment & Supply stocks the Proactive Tornado Pump so your pump can ship the same day.
Please note: Available with battery clamps only. This pump does not come with a cigarette plug.
New - The Low Flow Controller #51730 can now be used with the Tornado Pump for low flow sampling.
The Engineered Plastic Tornado pump is capable of pumping up to 85 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells. Plan to use the Tornado Pump for your next field event.
The Tornado can operate under harsh conditions with higher turbidity.
The Tornado can run continuously in water without the need for a cool down!
The Tornado has a 400 hour motor life!
The Tornado has a sleek outside that minimizes well hang-ups.
The Tornado is a very reliable and economical pump that provides great value for your dollar!
| Specifications | |
|---|
| POWER CONSUMPTION: |
210 WATTS (MAX) |
| VOLT RECOMMENDATION: |
12-15 At Source |
| MAXIMUM AMP OUTPUT: |
14 AMPS |
| MEASUREMENTS: |
LENGTH 27” / DIAMETER: 1.82” |
| REQUIRED TUBING: |
3/8" ID LOW DENSITY POLYETHYLENE TUBING |
| SUPPLIED WITH: |
90 FEET OF HEAVY DUTY 10 GAUGE WIRE & BATTERY CLAMPS |
