|
BACK
ProActive S.S. Monsoon
EE&S P/N: 51891
 ProActive Environmental Products continues to pursue its MISSION of designing safe and reliable low voltage groundwater submersible pumps. ProActive is proud to engineer the SS-Monsoon 12-volt stainless steel pump for low flow sampling or ground water purging of monitoring wells. Its sleek design eliminates well hang ups and fits easily into a 2” monitoring well or larger.
SIMPLE TO USE AND EXTREMELY POWERFUL
The SS-Monsoon is capable of pumping up to 120 feet from ground level to water level. Simply, connect the pump connector to the Low Flow with Power Booster 2 “LCD” Controller, then to a 12 volt battery, energizing the pump. Sound Simple? We think so.
For the Harsh Environments
Designed for the Field Technician in mind, the SS-Monsoon can handle the daily field riggers that are associated with ground water or remote water sampling. With its complete high polished stainless steel body and components, you can rest assure that the SS-Monsoon will not rust or corrode under normal working conditions. Low cost, low maintenance and ease of use make the SS-Monsoon the preferred choice for groundwater purging or low flow sampling.
Why Choose the SS-Monsoon
Simple to use! Runs off a 12 volt DC car battery.
Lifts up to 120 feet deep from ground level to water level!
Reliable design is suitable for continuous sampling or purging of groundwater wells.
Low Flow Sample as low as 10 ML per minute, from any depth, when using the Low Flow with Power Booster 2 “LCD” Controller.
Easy to read, glow in the dark LCD display conveniently placed on top of the Low Flow with Power Booster 2 “LCD” Controller makes adjusting and reading the discharge rate a breeze!
Computer engineered bottom debris filter screen minimizes passing sand, small rocks and debris, reducing clogging or damaging the pump motor!
Long lasting, high performance pump motor lasts over 500 hours under normal working conditions.
Simple to clean and decontaminate!
The SS-Monsoon is only 1.82" OD and constructed of three high polished stainless steel parts:
1. The replaceable motor module
2. The motor housing top connector
3. The outside pump housing
SS-Monsoon "60 Second Change Out Motor Design!" - A Great Value!
Should the motor fail, the field technician can change out the SS-Monsoon motor in less than 60 seconds! And to start you off with; the SS-Monsoon comes complete with one additional motor module. In essence, you will be receiving two pumps for the price of one!
The main wear out parts consisting of the motor and seal all have been incorporated in a single replaceable motor module. Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist! Once installed, your pump is essentially new and will have a life span identical to a
new pump.
Low Flow With Power Booster 2 “LCD” Controller
This Controller is specifically engineered for the SS-Monsoon and is rated for a continuous 25 amps. Only weighing 2 pounds, The Low Flow with Power Booster 2 “LCD” Controller is constructed of a heavy duty NEMA 4 steel casing. For added safety, this controller is engineered with a reverse polarity protection circuitry that incorporates a 30 amp fuse to protect the Controller and user.
The controller is also protected with a current limitation circuitry and thermal overload protection. Easy to read, glow in the dark LCD display conveniently placed on top of the Low Flow with Power Booster 2 “LCD” Controller makes adjusting and reading the discharge rate a breeze!
Purge or Low Flow Sample With One Easy Dial!
Once turned on, the Low Flow with Power Booster 2 “LCD” Controller has the ability to boost a 12 volt dc battery to a constant 19 volts by means of Constant Voltage Regulation (CVR) Technology; by accomplishing this, the SS-Monsoon high performance pump motor will be energized with a constant 14 volts. In short, it has the ability to lift up to 120 feet from ground
water level!
And, with the Low Flow With Power Booster 2 “LCD” Controller, the Field Technician can control the water discharge all the way down to 10 ML per minute from 120 feet or less, meeting and exceeding the EPA® groundwater guidelines for Low Flow Sampling!
Specifications:
- Power Consumption - 300 Watts (Max)
- Volt Recommendation - 12-15 At Source
- Maximum Amp Output - 25 Amps
- Measurements - Length 7.5” / Diameter: 1.82”
- Constructed - High Polish Stainless Steel
- Discharge Outlet - 3/8" ID poly tubing can be used
- Supplied With - 130 feet of heavy duty PVC wire neatly rolled up on a tubular metal reel with pump holder and Low Flow Power Booster 2 with LCD adapter.
Call 1-800-739-7706 for prices.
|
